Do you offer custom rotary joint?

yes,we can offer custom rotary joints, for custom rotary joints,you need to give the parameters to our company:

1. Basic parameters
1. Interface size: It needs to match the pipeline or equipment interface. Common sizes include 1/4 inch, 1/2 inch, etc. Metric/imperial systems need to be distinguished.
2. Pressure range: Indicate the maximum working pressure (e.g., 10MPa). Overpressure may lead to seal failure.
II. Performance indicators
1. Temperature range: Typically, there are two types: normal temperature type (-20℃~80℃) and high temperature type (with an upper limit of up to 300℃). The medium temperature must fall within this range.
2. Rotational speed: There is a significant difference between high-speed models (such as 5000RPM) and low-speed models. It is necessary to match the rotational speed of the equipment, as excessive speed can lead to wear and tear.
III. Medium Compatibility
1. Medium type: Different media such as water, oil, steam, etc. require corresponding sealing materials (e.g., graphite for high temperature resistance, fluororubber for corrosion resistance).
2. Flow requirements: The size of the pipe diameter affects the flow rate, and it is necessary to calculate to avoid pressure loss caused by excessively high flow velocity.