Gap sealed rotary joints
- मध्यमhydraulic oil
- संचालन तापमान-30~+80℃
- काम का दबाव21Mpa
- अधिकतम गति3500 आर/मिनट
Gap sealed rotary joints
Clearance Seal Rotary Joint is a special type of fluid dynamic sealing device that belongs to non-contact sealing structure. It is mainly used in industrial scenarios with high speed, high pressure, and strict requirements for friction resistance, such as high-end machine tools, metallurgical equipment, and automated production lines
Vertical fixture rotary joint is a type of rotary joint specifically designed for medium to high speed and high voltage multi-channel equipment

उत्पाद की विशेषताएँ:
दो चौड़े और उच्च-सटीकता वाले बेयरिंग्स द्वारा समर्थित, संचालन सुचारू है और बेयरिंग्स को जीवन भर रखरखाव की आवश्यकता नहीं होती;
उच्च गति और उच्च-दबाव सीलिंग संरचना, सीलिंग रिंग्स का बिना संपर्क के घिसाव, उत्पाद के दीर्घकालिक परेशानी-मुक्त संचालन को सुनिश्चित करती है;
घूर्णी टॉर्क कम करें;
एक विशेष उत्पाद संरचना अपनाने के कारण, उच्च-गति संचालन के दौरान घर्षण से कोई ऊष्मा उत्पन्न नहीं होती है।;
घूर्णी टॉर्क कार्यशील दबाव और तापमान से प्रभावित नहीं होता है।;
The working range of the speed is wide, and it can reach up to 3500RPM at high speeds;
बाहरी वातावरण में रिसाव को रोकने के लिए निकास छेद का डिज़ाइन;
ग्राहकों की जरूरतों को पूरा करने के लिए उत्पादों को अनुकूलित करने में सक्षम होना;
routine maintenance
1. The rotating joint drum and the interior of the pipeline should be kept clean. Special attention should be paid to new equipment, and filters should be added if necessary to avoid abnormal wear of rotating joints caused by foreign objects.
2. Long term disuse of the machine can cause scaling and rusting inside the rotary joint. Please be aware that there may be jamming or dripping when reusing.
3. If equipped with an oil injection device, please inject oil regularly to ensure the reliability of the rotating joint bearing operation.
4. The rotating joint of the circulating heat medium should gradually warm up to avoid sudden temperature changes.
5. Check the wear condition and thickness change of the sealing surface (usually normal wear is 5-10mm); Observe the friction trajectory of the sealing surface to see if there are any issues such as three-point interruptions or scratches. If there are any such problems, they should be replaced immediately.
6. Rotating joints should be handled with care and are strictly prohibited from being impacted to avoid loss of joint components.
7. It is strictly prohibited for foreign objects to enter the interior of the rotary joint.
8. Do not idle the rotary joint for a long time.