1109-043-212 swivel union factory

1109-043-212 swivel union factory

1109-043-212 is a single channel, rotor mounted center outlet high-speed rotary joint , specifically designed for machine tool spindle coolant or MQL (micro lubrication), supporting up to 20000 RPM speed, 140 bar coolant pressure, and 71 ° C medium temperature. ‌‌
  • मध्यमWater-based coolant
  • संचालन तापमान71℃
  • काम का दबाव105bar
  • अधिकतम गति36000r/min

1109-043-212 swivel union factory

Model series: Belongs to the 1109 series “hole installation type” (rotor installation), with a threaded rotor connection of M16 × 1.5 LH (left-hand), a supply end interface of 1/4 “-19 PT (cone tube thread), and radial discharge.
Media compatibility: coolant (up to 140 bar/71 ° C/24.3 L/min) or MQL (up to 10 bar/71 ° C/608 L/min), supports pressure free dry operation (Pop off) ™ Technology).
Structural features: Silicon carbide mechanical seal, bearing support, anodized aluminum shell, labyrinth seal for leak prevention, full flow design to avoid impurity accumulation.

1109-011-165 रोटरी जॉइंट
Typical applications: High speed CNC equipment such as machining centers, high-speed drilling machines, and deep hole gun drills that require water/lubrication from the spindle center.
Key dimensions: Installation thread M16 × 1.5 LH, outer diameter approximately 30 mm, total length ≈ 105 mm (specific subject to official drawings). ‌‌
Most of our company’s basic accessories are standardized, modular, and non-standard customized, which can greatly reduce costs and delivery times.
The sealing mating surface is selected according to customer needs
बाहरी पाइप में थ्रेड्स या क्विक-चेंज फ्लैंज कनेक्शन विधि होती है, जो मजबूत इंस्टॉलेशन लचीलापन प्रदान करती है।
शेल में बेयरिंग्स के उचित रखरखाव और उनकी सेवा अवधि बढ़ाने के लिए तेल इंजेक्शन नोजल लगे होते हैं।
शेल में रिसाव और घिसाव की स्थिति का समय पर निरीक्षण करने के लिए अवलोकन छेद लगे होते हैं।
The air type adopts aluminum or aluminum alloy and copper shell, which has the advantage of good heat dissipation performance under high-speed transmission,
Aluminum alloy shell, equipped with imported SKF and TIMKEN bearings, impregnated graphite rings, 304 stainless steel silicon carbide shaft, and wear-resistant fluorine rubber O-ring, suitable for high-speed rotating equipment, making it more wear-resistant and have a longer service life!