K series high-speed and high-pressure rotary joints
- मध्यमhydraulic oil
- संचालन तापमान-20-80 ℃
- काम का दबाव21 मेगापास्कल
- अधिकतम गति3000 आरपीएम
K series high-speed and high-pressure rotary joints
The K series rotary joint is a type of rotary joint specifically designed for medium to high speed and high pressure multi-path equipment, serving equipment such as machining center rotary workbenches, hydraulic workstations, coilers, wind turbines, centrifuges, etc.

उत्पाद की विशेषताएँ:
1. Supported by two wide and high-precision bearings, the operation is smooth and the bearings do not require maintenance for life;
2. High speed and high-pressure sealing structure, no contact wear of sealing rings, ensuring long-term fault free operation of the product and low rotational torque;
3. Adopting a special product structure, there is no frictional heat generated during high-speed operation; The rotational torque is not affected by working pressure and temperature;
4. The working range of the speed is wide, and it can reach a maximum speed of 5000 RPM; Drain hole design to prevent leakage to the external environment;
5. Serve equipment such as machining center rotating workbenches, hydraulic workstations, coilers, wind turbines, centrifuges, etc;
Notes:
के सीरीज़ के उत्पाद गैप सीलिंग संरचना अपनाते हैं, और स्थापना के दौरान निकास छेद L को तेल पाइप के माध्यम से रिटर्न तेल टैंक से जोड़ना आवश्यक है, तथा रिटर्न तेल पाइपलाइन दबाव बनाने के लिए अवरुद्ध नहीं होनी चाहिए।;
2. आंतरिक चैनलों में पारस्परिक रिसाव होता है, और क्रॉस-कंटैमिनेशन को रोकने के लिए विभिन्न द्रवों की अनुकूलता पर ध्यान देना चाहिए;
3. उच्च सटीकता वाले कनेक्टर्स, कार्यशील द्रव का उपयोग से पहले 10 μ m से कम नहीं की छानने की सटीकता के साथ फ़िल्टर किया जाना चाहिए;
4. तापमान में वृद्धि से हाइड्रोलिक तेल की सान्द्रता (viscosity) कम हो जाएगी, जिससे आंतरिक रिसाव में वृद्धि होगी। उपयोग के दौरान एक कूलिंग डिवाइस की आवश्यकता होती है;
5. The hydraulic system needs to have an automatic pressure regulator to compensate for the pressure loss caused by internal leakage in the joint;